A foundation permit has been issued for a mixed-use development at 455 N. Carpenter planned by Range Group. Located at the southeastern corner of N. Carpenter St and W. Grand Ave, the vacant two-story industrial building on the site was demolished to make way for the new project.

455 N. CarpenterGoogle Maps

Designed by Hartshorne Plunkard Architecture, the five-story building will have 72 residential units, with a mix of studios, one-beds, and two-beds. 14 apartments will be set aside as affordable within the building.

455 N. CarpenterHartshorne Plunkard Architecture

On the ground floor, approximately 3,600 square feet of retail space will front W. Grand Ave, with the residential entry around the corner on N. Carpenter St. The remainder of the ground floor wrapping back to the alley will hold 30 parking spaces

455 N. CarpenterHartshorne Plunkard Architecture

Rising 80 feet in height, the building has been designed with rounded corners and a massing broken up with inset balconies along the N. Carpenter St frontage. The project’s facade will be made up of brick masonry with punched window openings. 

455 N. CarpenterHartshorne Plunkard Architecture

The development recently received approvals from the ZBA for variations to reduce the required setback from the side building line to a rooftop stair and elevator enclosure from 100.86 feet to 60.67 feet, a variation to allow up to 25% reduction to the amount of street facing transparent window area required from 972.8 square feet to 730 square feet, and a special use to allow a proposed residential use to be located within 660' of an existing use listed in 17-3-0307.

455 N. CarpenterHartshorne Plunkard Architecture

With the foundation permit issued, general contractor McNea and Sons Construction can begin work on the new construction. A full building permit is also awaiting issuance to allow construction to proceed through completion.